UMD Tool
by SodR
Version: 0.2
Platform: Sony PSP
Contact: Karl.SodR@Gmail.com
Download: Hem.bredband.net/kalsod

------------------
News:
------------------

I was playing around with MPHGL and succefully managed to patch it
to run at 333MHz. You can just simply replace the old mphloader.prx
with my new one to play at full speed yourself. You don't beleve me?
Try to first launch gta with mph's orginal prx and then replace it 
with mine. You WILL directly feel a difference. 

------------------
New functions:
------------------

- Launch MPHGL at 333MHz (use patched mphloader.prx)
- Dump UMD (Based on MPH's UMD ripper, I'd done some modifying)
- Test that the UMD and UMD drive works properly

------------------
"Old" Functions:
------------------

- Start the UMD               |  Just boots the UMD via eboot.bin
- Start the UMD at 333MHz  	|  Boots the UMD and overclocks the psp to 333MHz
- Boot 2.0+ UMD               |  Boots a 2.0+ UMD using the same method as flashmod
- Launch RUNUMD		      |  Launches RUNUMD (no 333Mhz support yet (RunUMD needs to be installed)
- Launch MPHGL (now at 333Mhz)|  Launches MPHGL and overclocks the psp to 333Mhz (Patched MPHGL needs to be installed)


------------------
Install notes:
------------------

On 1.5:
	- Copy the folders UMD and UMD% into x:/PSP/GAME/ dir ( x = your psp drive letter )
	- Go to Game-->Memorystick in the PSP Dashboard and start UMD Tool 0.2

	Note 1: If you want to use the RUNUMD function you need to have RUNUMD installed (Download RunUMD and copy RunUMD and RunUMD% to ms0:/PSP/GAME/)
	Note 2: If you want to use the MPHGL function you need to have MPHGL with the patched mphloader.prx installed (Download MPHGL and copy MPHGL and MPHGL% to ms0:/PSP/GAME/ then copy over my pathced mphloader.prx)
	Note 3: If you want to use the 2.0+ UMD function (the FlashMod way) you need to have a dump of the 2.0 flash located at the root of the memorystick
